Worm drive gearbox with motor
A robust worm-drive gearbox powered by an MM28 motor. Ideal applications where an easy to fit, high torque output is required. Great for student based projects including robots and buggies.
The machine has been worm motor designed so that the output shaft could be ‘clicked’ in and out for modification. E.g. reducing to size. The motor is snap installed into its cradle to engage the gear and worm.
Details
1 – 6V DC
0.1A to 1A depending on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
Overall dimensions of box + motor: 35(W) x 40(H) x 60(L)mm
The primary feature of the high-efficiency gear box is a worm gear, which locks the output shaft whenever the electric motor is not turning. The high gear ratios of 216:1 or 336:1 make this gearbox appropriate for little strolling robots, lifting mechanisms, and various other applications where high torque is definitely desired.
The low-voltage motors in the worm gearbox run on 1.5-4.5 volts and draw up to a few amps, making them ideal applicants for the DRV8833 motor driver carrier. Engine overheating can be caused by excessive stalling, even at very low voltages. We recommend that you use stall-detection sensors, or simply view your robot, to make sure that it doesn’t stall for more than a few seconds at the same time.
This gearbox includes a 4 mm diameter, round output shaft, which works with the wheels that are compatible with Tamiya 4 mm, round shafts. Our 3 mm universal mounting hub also matches on the smaller threaded end of the shaft, though it is not particularly designed to work with this type of shaft (the hub’s set screw could harm the thread on the shaft).
Ever-Power gear motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical right angle worm geared motors set new requirements for reliability, efficiency and economy with unparalleled features which includes hollow shafts in the tiniest sizes. An inverter friendly design offers easy integration at this point and a future proof option. The Ever-Power gear engine offers total versatility in mounting options includes shaft, base, face, and flange solutions. The motor terminal box can be mounted in choice positions rotated in 90º steps around the motor frame providing for unparalleled integration opportunities.
Ever-Power gear motors comply with UNITED STATES and International specifications, including NEMA, IEC, CSA, and CE, the Ever-Power series permits worldwide acceptance, a genuine total solution for our global customers.
Excellent protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dirt tight and hose evidence,and can be used outside or in wet and dusty environments without the use of additional enclosures. Full rated output is offered by the result shaft of the unit.
Product Features
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change 1st after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Additional features:
Connecting with Plug connectors.
With built-in inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-I, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm equipment motors are the answer for applications requiring a part turn, optional dual output, or an inability for the engine to be back driven. The DC right angle equipment motors are designed for constant and intermittent duty procedure. Our right angle equipment reducers are designed with many mounting plate options, making them ideal for a number of DC electric motor based applications. We offer 12 ratios ranging from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Standard brush life of 2000+ hours (varies by application)
EP Products Worm Equipment Motors are made to generate high torque in a little package size. Worm Gear Motors are great for applications that require a self- locking or breaking feature since the output shaft can’t rotate when there’s no power used. Additionally, Worm Gearheads can transfer motion in 90 degrees. With various reduction ratios, precision cut gears, voltages and sizes, EP Products includes a DC Worm Equipment Motor solution for your application.
Features and Benefits
Very High Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Capability to Handle Large Gear Reduction Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Protection Door Locks / Industrial Conveying Systems / Security Gates / Dental Chairs / Ambulance Cots & Stretchers Quite a few DC Motors could be complimented with among our Worm Gearheads. EP Products will work with you to design and produce a Worm Gear Motor that may optimize the functionality of your specific application.
Built to your specific requirements
Electric motor Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Cut / Round / Splined / Other)
General Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Extra Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm electric motor runs on the metal gear box for strength and a high torque output. Due to the special mechanical structure of the worm drive the motor output shaft is usually self locking and can not be rotated.
This part runs on the two wire connection and supports direction control along with PWM speed control. Ranked voltage is 12v and can achieve 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Rated Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear models from EP DRIVESYSTEMS especially display their power in applications where high equipment ratios are essential. Our worm geared motors are as a result optimally suited for make use of in intralogistics, packaging technology and the meals & beverage industry.
Four great reasons for EP worm geared motors:
Rugged
Our worm geared motors have a higher overload capacity
Maintenance Friendly
Washdown versions allow simple and effective cleaning of the drive system.
Corrosion protection
The NSD tupH sealed surface area conversion is exceptionally chemical, corrosion and abrasion resistant.
Flexibility
Our modular design give users optimum freedom.
The modular system for maximum flexibility: Our EP worm gear units
There are many applications that require drive systems, and each one of these has its own unique requirements. The EP series worm equipment motors could be quickly and effectively adapted to satisfy your needs.
Worm gear systems impress with their high power density and compact style. If required, we can also supply them with the highly effective nsd tupH surface treatment.
In addition to the basic EP casing, you can expect an extensive line of bolt-on components to customize the product including torque arms, shaft covers and output flanges. These could be very easily field installed, but we will also be happy to assemble the individual components for you.
Find out more about our modular SI worm geared motors!
Find out more
Easy and Clean: The EP worm equipment unit SMI
SMI worm gear units feature a smooth, corrosion-resistant alluminum alloy casing. Optional nsd tupH surface conversion makes the product ideally suited for severe and challenging industries like food processing and pharmaceuticals.
Versatile input designs such as for example NEMA, IEC or immediate motor mounts in additional foot or flange mounted housing designs.
Worm geared motors
Worm geared motors for little power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared engine program. The units have got on all sides different repairing possibilities and enable an easy assembling for the client.
Various other drive configurationscan be designed by use of built-on components (e.g. torque arm and result flanges). The housings are made in light weight construction out of aluminium die cast. Electric motor attachment is realised in general by way of IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:result shaft, output shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm
Buy Worm Drive Gearbox with Motor – incorporating the following features: 1 to 6V voltage rating, 17100 rpm no load swiftness, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm wide, 40mm high, a robust worm drive gearbox powered by an MM28 motor (included), most ideal for applications where an easy to match, high torque output is necessary, nylon housing and gear, requires light oil or silicon grease lubrication, ideal for student based projects including robots and buggies.
Most suitable for applications where a simple to match, high torque output is required
Ideal for student based projects including robots and buggies
Reversible High torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
Reversible High torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Features:
The electric motor is Gear DC engine with micro-turbine worm, you can change the wiring-connection to change motor rotation.
Turbo worm geared motor with self-lock, that’s, regarding motor without electrical, the output axis is fixed, self-lock.
The reducer output shaft arranged vertically with the motor shaft, whole motor output shaft relatively-short than general gear motor, widely used to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Result torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the screen, door, Mini winch. Ect.
In sumo robot or combat robot competition where high holding torque’s motor is essential to avoid your robot being pushed by your opponent robot. The worm equipment is certainly a better option compared to the spur gear motor. Why is worm gear so special? Take a look wiki out: Worm Drive.
“Unlike with ordinary gear trains, the path of transmission (insight shaft vs result shaft) is not reversible when working with large reduction ratios, due to the greater friction involved between the worm and worm-wheel, when usually a single start (1 spiral) worm is used. This can be an advantage when it’s desired to remove any probability of the result driving the input.”
In other phrases, it is hard to push your load (example, your robot) if the motor isn’t power or rotate.
Features and Spec:
Metal gear box
Output shaft is self-locking because of the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g