These worm gear screw jacks are extremely precision and reliability, it could meet all the necessary protection, cost-efficiency, and strength mandates of the application. High strength Worm Gear Jack bronze worm gear can be used, the payloads from 0.5T to 100T . A total of 11 sizes are available, each in a journeying nut version and a simple version.

Worm gear drive screw jack
Translating(traveling screw) and rotating (traveling nut) configurations
Electric Driven and Manual Operated both can be found
Trapezoidal spindle (self-locking) and Ball Screw spindle (high efficiency) version
Design option: Regular, Anti-rotation, Anti-backlash or Protection nut
Standard and customized end fittings, installation options, and drive shaft
Worm Gear Screw Jack systems are ruggedly designed and stated in standard models with load managing capacities from 1/4 ton to 100 tons. They may be used individually or in multiple arrangements. There are no “standard” travel lengths and all Worm Gear Screw Jack systems are built to specification.
The jack housings are made from ductile iron and proportioned to support the rated capacity of the machine. MJ, 1/4 ton, and 1/2 ton models have aluminium housings.

Each Worm Gear Screw Jack incorporates an alloy metal worm which drives a higher strength bronze worm gear (drive sleeve). The worm shaft is supported on antifriction tapered roller bearings with exterior seals provided to avoid loss of lubrication (sealed radial bearings on the MJ, 1/4 , 1/2, and 1 ton devices). The drive sleeve is definitely backed on antifriction tapered roller or ball thrust bearings. Rotation of the drive sleeve causes the lifting screw to translate or rotate, dependant on jack configuration.
The Inch and Metric Worm Gear Machine Screw Jacks incorporate an alloy or stainless steel worm which drives a high strength bronze worm gear (drive sleeve). The worm shaft is supported on anti-friction tapered roller bearings with exterior seals provided to avoid lack of lubrication. The drive sleeve is usually supported on anti-friction tapered roller or ball thrust bearings. Rotation of the drive sleeve causes the thread lifting screw to translate or rotate, dependant on jack configuration.

The threads are precision formed, typically using Course 2-C (Centralizing) tolerances. Jack lift shaft lead tolerance is approximately ±0.004″ per foot.