Ever-power Taper-Lock pulleys are flangeless for clean, compact application. They are engineered with an 8° taper and a flush-installed design without protruding parts providing protected locking and elimination of wobble. Furthermore, Dodge Taper-Lock® bushings can be found with an optional Gemstone D® integral key in popular sizes for a more precise fit.
Product Features
Stock sizes available up to 12” shaft diameter
Globally acceptance and availability inch and metric bores
Flush Mounting-No Protruding Parts
Easy On/Easy Off design
Materials obtainable in sintered metal, cast iron, ductile iron, steel and stainless steel
modifications & accessories
Re-borable bushings available for special bores or key seats, spline broaching.
Common Applications
Aggregate & Cement
Air Handling
Chemical, Oil, & Gas
Food, Beverage, & Pharmaceutical
Paper & Forest
Unit & Baggage Handling
Water & Wastewater
common applications
Any application that requires mounting of a product on a shaft
Bushings are essential elements to attach Dodge mechanical drive parts:
V-belt drives
synchronous drives
roller chain drives

Notes:
Fits SPA section V Belt
The Taper-Lock pulley size is defiined by 4 digits representing two numbers. The 1st two digits represent the utmost bore size and the second two digits represent the bushing length. For instance, product number 1008 has a max bore of just one 1.0″ and a total amount of 0.8″
” bore sizes are specified with the complete inch followed by the fraction. For instance a 1.5″ diameter bore will be 1-1/2. Metric bore sizes are designated with “MM” following the metric dimension (X 25MM). These bushings are easy to install and remove, these bushings fit flush into tapered bushing sprockets and or pulleys. The bushing contacts and wedges inward, gripping the shaft and bore of the sprocket. Bushings have an 8° taper, are made from steel and have a black oxide coating.

Specs :
Pitch Diameter: 75mm
Outside Diameter: 80.5mm
No of Rows: 2
Bush Size: 1108
Maximum Bore Size: 28mm / 1.1/8
Material: Cast Iron