A sprocket sprocket-wheel is a profiled wheel with teeth, or cogs, that mesh with a chain, track or other perforated or indented material.[The name ‘sprocket’ applies generally to any wheel where radial projections engage a chain moving over it. It is distinguished from a gear in that sprockets should never be meshed together directly, and differs from a pulley in that sprockets have tooth and pulleys are clean.
Sprockets are used in bicycles ,motorcycles ,vehicles , tracked automobiles, and other machinery either to transmit rotary movement between two shafts where gears are unsuitable or even to impart linear movement to a monitor, tape etc. Probably the most common form of sprocket could be within the bicycle, in which the pedal shaft bears a sizable sprocket-wheel, which drives a chain, which, subsequently, drives a small sprocket on the axle of the trunk wheel. Early automobiles were also largely driven by sprocket and chain mechanism, a practice generally copied from bicycles.
Sprockets are of various designs, a maximum of efficiency getting claimed for each by its originator. Sprockets typically don’t have a flange,Some sprockets used in combination with timing belts,possess flanges to keep carefully the timing belt centered. Sprockets and chains are also used for power transmission from one shaft to some other where slippage is not admissible, sprocket chains becoming used instead of belts or ropes and sprocket-wheels rather than pulleys. They may be run at high speed plus some kinds of chain are so built as to be noiseless even at high speed.
Ever-power Wheel Sprocket 36T 36 Tooth Motorized Gas Cycle Bike 50cc 60cc 80cc
Fit 49cc 50cc 66cc 80cc Motorized Bicycle Bike Moped
Package Include: 1x sprocket
USE FOR Rear Sprocket Mount Installation Pads Kits/ 9 Hole Sprocket Mount Kit USE FOR CNC 3 Holes Sprocket USE FOR Back Hub Disc Brake Ball Bearing
Purchase With Confidence – Buy our Motorparts Product knowing it’s a perfect fit, excellent quality, created to last, & most importantly we stand behind our products.

Ever-power Wheel Sprocket 40T 40Tooth Motorized Gas Routine Bicycle 50cc 60cc 80cc

Fit 49cc 50cc 66cc 80cc Motorized Bicycle Bike Moped
Package Include: 1x sprocket
USE FOR Back Sprocket Mount Mounting Pads Kits/ 9 Hole Sprocket Mount Kit USE FOR CNC 3 Holes Sprocket USE FOR Back Hub Disc Brake Ball Bearing
Purchase CONFIDENTLY – Buy our Motorparts Item knowing it’s a perfect fit, excellent quality, built to last, and most importantly we stand behind our products.
CHAIN SPROCKET WHEEL / CUSTOM-MADE
Characteristics

Other characteristics:
for chain, custom-made
Description
Ever-power not only manufactures sprockets and plate wheels according to ISO 606 but also personalized versions built in accordance with your specs, drawings or samples.

Sprockets
Our standard range of sprockets includes sprockets in accordance to ISO 606 from size 05B-1 to 32B-3.

Sprockets with taper-lock bushes
Taperlock-bushes for fixing hubs precisely and axially centered on a shaft.

Plate wheels
Standard plate wheels for the entire Ever-power product program: sizes 05B-1 to 32B-3.

Drive sprockets and idler wheels
For the FLEXON Flat Top Chain plan.

Our drive parts program includes torque limiters, Couplings, Tensioners, Chain tools and etc.
Model article number: –

SPROCKET WHEEL / FOR CHAIN / STEEL
Characteristics
Other characteristics:
hub, for chain, steel
Sprockets single 3/8″ x 7/32″ DIN ISO 606, prepared to install

Material:
Steel C45.

Version:
Bright.
Tooth inductively hardened ~HRC 50.

Note:
Ready to install sprockets with hub on one part for DIN ISO 606 roller chains. Teeth are milled and inductively hardened.
Keyway acc. to DIN 6885 / BS 4235. The keyway is usually aligned with the tooth tip.
With two grub screws. One tapped hole aligned with the keyway center, the other offset by 90°.

Product Description
Chain Sprocket Wheel:
By using our skilled engineers, we are manufacturing and supplying optimum quality Chain Sprocket Wheel. These sprockets were created and engineered with precision at our technically advanced manufacturing facility, with the usage of high quality quality metals and alloys. In addition to this, by using our wide logistics base, we have become capable of making on-time payment of purchased consignments.

Features:
Tough construction
Accurate dimensions
Easy to fit

Specifications:
Material: Iron,1023(A3) 1045(45)
Shape: Cylindrical Gear
Chain sprocket: Sprocket gear

Q&A
Question: will it suit a #40 chain?
Answer: not sure just what a amount 40 chain is…i know it works with the 215 or 220

Question: Will certainly this sproket fit 415 chain?
Answer: Yes.

Question: Does this install to the disk brack install?
Answer: The sprocket can either be used with the 9 hole method or if the rim includes a 1″ hub drectly to the hub. The second being my preferred since there is no chance of over torqing the spokes
Question: will this suit the 1.5 inch hub adapter.
Answer: Yes