Hanging Pulleys designed for Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move a single load, such as block and deal with systems. They require about half the drive of a single-groove pulley to move the same load.
Pulleys with a bearing are simpler to turn than pulleys with out a bearing.
Acetal, nylon, and light weight aluminum are light-weight and corrosion resistant. Stainless steel may be the most corrosion resistant.
Styles C, D, and J have got a bracket on the bottom for tying off one end of a rope.
Style K reduce the force needed to hold your load set up. Unlike regular pulleys, these have a V-groove for more grip on your rope, and they ratchet when under load therefore they don’t slip in the other direction. Pulley for3/8″ dia. rope can be established to ratchet even when not under load.
Mounted Pulleys for Rope-For Horizontal Pulling
Attach these pulleys to a set surface to assist with horizontal pulling or even to guide a rope.
Pulleys with a bearing are simpler to convert than pulleys with out a bearing.
Light weight aluminum and nylon are light-weight and corrosion resistant. Stainless gets the most corrosion resistance.
Pulleys for Rope-For Horizontal Pulling
Also known as sheaves, use these pulleys to aid with horizontal pulling or even to guide a rope.
Pulleys with a bearing are easier to convert than pulleys with out a bearing.
Acetal and light weight aluminum are lightweight and corrosion resistant. Galvanized metal is usually more corrosion resistant than iron and steel. Stainless steel may be the most corrosion resistant.
Easy-Open up Hanging Pulleys for Rope-For Horizontal Pulling
Also known as snatch blocks, these pulleys open so it is simpler to feed the rope through the housing-a free rope end is not needed. Use them to aid with horizontal pulling or even to guide a rope.
Pulleys with a bearing are simpler to switch than pulleys without a bearing.
Aluminum is more lightweight than stainless steel. Stainless is more corrosion resistant than aluminium.
Pulleys for Wire Rope-For Horizontal Pulling
Also known as sheaves, use these pulleys to aid with horizontal pulling or even to guide a rope.
Pulleys with a bearing are easier to convert than pulleys with out a bearing.
Acetal and nylon are light-weight and corrosion resistant. Stainless steel is the most corrosion resistant.
Mounted Pulleys for Wire Rope-For Horizontal Pulling
Attach these pulleys to a flat surface to assist with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move an individual load, such as for example block and deal with systems. They require about half the push of a single-groove pulley to go the same load.
Pulleys with a bearing are easier to switch than pulleys without a bearing.
Stainless steel is definitely more corrosion resistant than steel.
Hanging Pulleys intended for Wire Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move an individual load, such as block and tackle systems. They require about half the force of a single-groove pulley to move the same load. They have got a bracket on underneath for tying off one end of your wire rope.
Pulleys with a bearing are simpler to switch than pulleys without a bearing.
Nylon is much lighter than metal. Aluminum is corrosion resistant. Stainless steel is the most corrosion resistant.
Pulley with carabiner can mount to metal framing or hang as part of your rigging system.
Easy-Open up Hanging Pulleys for Wire Rope-For Horizontal Pulling
Also called snatch blocks, these pulleys open so it’s easier to feed the rope through the housing-a free rope end is not needed. Use them to assist with horizontal pulling or to guide a rope.
Style D pulleys possess a corrosion-resistant stainless steel housing.
Pulleys for Wire Rope-For Lifting
Use the bore to install these pulleys on a shaft. These pulleys are also called sheaves.
Pulleys with a bearing are easier to switch than pulleys with out a bearing.
Nylon pulleys are lighter in weight than steel pulleys.
Warning: Never make use of to lift people or items over people.
Mounted Pulleys for Wire Rope-For Lifting
Install these pulleys to a set surface.
Pulleys with two grooves are for use in applications where multiple pulleys move a single load, such as block and tackle systems.They can reduce the force needed to move the strain by up to two times in comparison to single-groove pulleys.
Pulleys with a bearing are simpler to switch than pulleys with out a bearing.
Stainless steel pulleys are more corrosion resistant that steel.
Style 3 pivots up to 200° for different pull directions.
Warning: Never use to lift people or products over people.
Hanging Pulleys meant for Wire Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are for make use of where multiple pulleys move a single load, such as block and deal with systems. They require about 50 % the pressure of a single-groove pulley to go the same load.
Pulleys with a bearing are easier to convert than pulleys with out a bearing.
Style E pulleys have bracket on the bottom that lets you tie off 1 end of your wire rope.
Warning: Never make use of to lift people or items over people.
Easy-Open Hanging Pulleys for Wire Rope-For Lifting
Also known as snatch blocks, these pulleys open therefore it’seasier to feed the rope through the housing-a free rope end is not needed.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as for example block and tackle systems. They require about 50 % the force of a single-groove pulley to go the same load.
Latch kits (sold separately) put in a latch to the swiveling hook on Style C to keep rope secure.
Warning: Never make use of to lift people or items over people
Hanging Pulleys to get Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are found in applications where multiple pulleys move an individual load, such as block and deal with systems. They can reduce the force needed to move the strain by up to 2 times in comparison to single-groove pulleys.
Pulleys with a bearing are simpler to turn than pulleys without a bearing.
Style A pulleys have a bracket on the bottom for tying off a single end of a rope.
Warning: Never use to lift people or products over people.
Easy-Open Hanging Pulleys for Rope-For Lifting
Also referred to as snatch blocks, these pulleys open so it is easier to feed the rope through the housing-a totally free rope end is not needed.
Warning: Never make use of to lift people or products over people.
Rope pulley
Tags: