Robotics
Industrial Automation
Dental Chairs
Rotary Tables
Pool Chair Lifts
Exam Room Tables
Massage Chairs
Packaging Eqipment
Labeling Eqipment
Laser Cutting Machines
Industrial Textile Machinery
Conveying Systems
Test & Measurement Equipment
Automated Guided Vehicles (AGV)
If you require a smaller sized design for a credit card applicatoin requiring lower load capability, we also produce value-added Spur Gear Motors. Learn more about the various features and benefits in our Planetary Gear Motor vs. Spur Gear Motor style note.
Built to your unique requirements
Most of our DC Motors could be complimented with among our Planetary Gearheads. Ever-Power will work with you to create and produce a Planetary Gear Electric motor that may optimize the overall performance of your application.
Electric motor Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Cut / Round / Splined / Other)
Overall Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Additional Assembly Requirements (lead wires, connectors, etc.)
Ever-Power is a DC planetary equipment motor manufacturer providing custom-designed solutions for all applications. Demand a quote for planetary gear motors or e mail us for assistance with your design.
Overview
These tiny brushed DC gearmotors possess a diameter of simply 6 mm and weigh simply over a gram, which makes them great actuators for miniature robots and incredibly small mechanisms. They consist of a coreless electric motor fastened to a planetary gearbox by a small clip. The gears are made from liquid crystal polymers (LCPs), and gearbox’s nylon output shaft is compatible with our 14 mm tires. Three gear ratios can be found:
26:1, which has a free run speed of 2500 RPM and stall torque of 1 1.5 oz-in (110 g-cm) at 6 V
136:1, which has a free run speed of 500 RPM and stall torque of 8 oz-in (550 g-cm) at 6 V
700:1, that includes a free run swiftness of 90 RPM and stall torque of 12 oz-in (900 g-cm) at 6 V
Note: Stalling or overloading gearmotors may greatly decrease their lifetimes and actually result in immediate harm. For these gearboxes, the recommended higher limit for instantaneous torque is certainly 3.5 oz-in (250 g-cm); we highly advise keeping used loads well under this limit. Stalls may also lead to rapid (possibly on the purchase of seconds) thermal damage to the electric motor windings and brushes; an over-all recommendation for brushed DC motor procedure is 25% or much less of the stall current.
The intended nominal operating voltage for these motors is 3 V to 6 V, though generally, these kinds of motors can be utilized at voltages outside this range (rotation typically starts between 0.2 V and 0.3 V). Lower voltages might not be useful, and higher voltages could start negatively affecting the life span of the motor. When operating at 3 V, the free-run velocity, stall torque, and stall current will all end up being about 50 % of what they are in 6 V as these specifications scale approximately linearly with voltage.
Since the gearmotor’s output shaft is nylon, there can be small variances in the diameter from unit to unit. These variations may cause press-fit attachments like our 14 mm wheel to match loosely in some instances. If you experience a loose fitting, you could try swapping tires or using a little dab of glue to greatly help hold the wheel on.
Gearmotor dimensions
The following diagram shows the micro plastic gearmotor dimensions in mm. The planetary gearbox includes a D-shaped plastic output shaft, which is 2 mm in diameter with a section that is flattened by 0.5 mm. The “D” part of the shaft is definitely 2.5 mm long. The electric motor measures 6 mm in diameter and 9.3 mm in length, and the gearbox size, labeled “L” in the diagram below, depends on the gear ratio.
26 RPM Planetary Equipment Motor with encoder: compatibility
This small 12V motor comes with a magnetic encoder mounted prior to the gearbox for a better resolution. Its 4 mm output shaft helps it be compatible with lots of ep mounts and part, which includes clamping hubs, Planetary electric motor mounts, along with 4 mm toothed wheels and pinion gears.
Technical specifications of the Premium Planetary Gear Motor with Encoder
Nominal voltage: 12V
Voltage range (recommended): 3-12V
No-load speed: 26 rpm
No-load current: 0.21A
Stall current: 4.9A
Stall torque: 42 kgf.cm
Gear ratio: 455,185:1
Metal planetary gear
DC motor
Output shaft diameter: 4 mm
Output shaft style: D-shaft
Output shaft support: dual ball bearings
Electric connection: 2.54 mm 6-pin female header
Operating temperature: approx. -10 to +60 °C
Compatible installation screws: M2 x 0.4 mm
Weight: 117.6 g
Encoder:
Cycles per revolution (motor shaft): 3
Cycles per revolution (result shaft): 1,365.555
Countable events per revolution (motor shaft): 12
Countable events per revolution (output shaft): 5,462.22
Relative quadrature encoder with magnetic Hall effect sensor
Encoder sensor input voltage range: 2.4 to 26V
Encoder sensor result pulse amplitude: equivalent to encoder sensor input voltage
Resources for the 26 rpm planetary gear motor
DE3 magnetic encoder use parameters
Motor spec sheet
Spur Gear vs. Planetary Gear
The two most common setup of DC motor gearbox are spur and planetary. Spur type gearbox are simpler, less costly, and work best for low torque applications. Torque capability of spur type gearbox is limited because each gear in the train bears different load. Planetary gearboxes, on the other hand, share equal load over multiple gears, making them more durable for high torque software.
Specification:
Model: PG42-775
Using Range Voltage: – 12-24V
Nominal Voltage: 24V
No Load Speed: 90 r/min
No Load Current: 500 mA
Max. Efficiency Speed: 90 r/min
Max. Efficiency Current: 3.5A
Max. ETorque: kg. cm-27 Power: W- 35
Stall Torque: 135 kg. cm
Stall Current: 20A
Reduction Ratio: 1:00 – 91
Weight: 775g