Ever-Power Corporation , announces its right angle NEMA gearbox designed to IP65 specifications for use in wash straight down applications in packaging equipment and comparable machinery. Rated backlash is certainly 30 arc-minutes with choices for 4 or 8 arc-minutes. The NEMA 34 flanged gearbox has 440C Stainless steel bearings with seals and Nitrile o-rings shaft seals on both input and output. All fasteners are stainless. Hard anodized light weight aluminum or 316 Stainless housings can be found. Customizing for apart from NEMA motors or your specific application is easily done.
This Nema 17 stepper motor with 39mm body and 1.68A rated current, integrated with a 41mm Planetary gearbox of 5:1 equipment ratio. It’s a good solution to applications that with special space but require low swiftness and/or high torque.
Electrical Specification
Manufacturer Part Number: 17HS15-1684S-HG5
Motor Type: Bipolar Stepper
Step Angle: 0.36 deg
Holding Torque without Gearbox: 39Ncm(55oz.in)
Rated Current/phase: 1.68A
Phase Resistance: 1.6ohms
Voltage: 2.7V
Inductance: 3.2mH ± 20%(1KHz)
Gearbox Specifications
Gearbox Type: Planetary
Gear Ratio: 5 : 1
Efficiency: 95%
Backlash at No-load: <=15 arcmin
Max. Permissible Torque: 3.5Nm(495.6oz.in)
Moment Permissible Torque: 6Nm(849.7oz.in)
Max. Radial Load: 150N
Ambient Temperature: -10 – 90℃
Insulation Class: B
Noise: <=50 dB
Life: 20000 h
Physical Specifications
Frame Size: 42 x 42mm
Motor Length: 39mm
Gearbox Length: 41mm
Shaft Diameter: Φ8mm
Shaft Length: 23.5mm
Key-way Length: 14mm
Number of Leads: 4
Lead Length: 320mm
Weight: 680g
Replaced by the 3325_0, a electric motor with the same NEMA size and same torque.
This NEMA-17 motor has an integrated Planetary gearbox with a 52/11 :1 ratio. It creates 16.2 Kg-cm of torque at 1.68 Amps.
When linked to a 1067 – EP, the 3317 has a maximum speed of a little over 900 RPM. At the output of the gearbox, the step angle is just a little under 0.35°. When using the step angle in calculations, you should derive the exact step position by dividing 1.8° by the gearbox decrease ratio.
This specific revision of the 3317 is made by a different producer, but should behave very much like the revision 0 version.
Brother Gearmotors NEMA C-Face Speed Reducers
The gears in these NEMA C-Face speed reducers are high strength, free of maintenance and will be mounted in any direction with their slip fit “O” ring style. Low to high decrease ratios, flange install or foot mount types, right angle or hollow shaft correct angle types available. Suit NEMA C-Face AC motors, brushless DC motors and brushed DC motors.
For 1/2 HP up to 3 HP Motors
NEMA C-Encounter, 140TC and 180TC input flanges
Inline Helical Gear Quickness Reducers
Right-Angle Hypoid Gear Speed Reducers
Product Lineup
Product Features
Allowable Torque
Downloads & Reference
NEMA C-Face Speed Reducers Lineup
Output Power
Gear Type
Input Power
Gear Ratios
Maximum Input Speed
NEMA 56C Speed Reducers
NEMA C-Face Speed Reducers
Parallel Shaft (Foot Install)
1/2 HP
1 HP
2 HP
3 HP
5:1 ~ 200:1 3600 r/min
Parallel Shaft (Flange Attach)
Right-Angle Hollow Shaft
5:1 ~ 240:1
Right-Angle Solid Shaft
5:1 ~ 240:1
*Torque and Acceleration vary based on insight voltage and frequency, please review item specifications for details.
Longer Life
In comparison to a spur gear of approximately the same pitch diameter, Helical gears can transfer high loads at greater speeds. This is because of the gradual engagement of one’s teeth and simple transfer of the strain.
Helical Gears
Lightweight and Compact
Die cast aluminum gear housings make these velocity reducers light in weight, allowing engineers to design less expensive mounting provisions
Maintenance Free
High-quality synthetic grease is utilized in every gearboxes. They are loaded at the factory and don’t need maintenance filling or level checks. This saves precious time at create and eliminates concern for expensive oil disposal necessary by the EPA.
Mount in Any Direction
These gearboxes are sealed with machine “slip” fit “O” rings and dual lip springtime shaft seals on both motor and input shaft and result shaft driver. Thus, the gear motors can be mounted in virtually any conceivable direction without concern for the positioning of a breather connect.
NEMA Result Flange Planetary Gearboxes, Max. Ratio 1000:1
Spec

Gearing Arrangement:Planetary,Spur
Frame Size:42.6/60/90/115/145 mm
Ratio:3~1000:1
Nominal Output Torque:8~215 N.m
Nominal Input Speed:2500~4000 rpm
Max. Input Speed:5000~6000 rpm
Backlash:12~15 arcmin, three stages, 6~9 arcmin, single stage, 8~12 arcmin, two stages
Noise Level:60~67 dBA/1m
Enclosure:IP65
Lubrication:Synthetic Lubricant
Key Features

The Ever-Power EP Series gearboxes are equipped with a NEMA output flange with metric shaft, to provide exceptional torque ratings and convenience of many of present servo and stepper movement control applications. The gearboxes are drop-ins for some industry standards and offered from one to three levels with ratios 3:1 up to 1000:1, the very best backlash of < 6 arc-minutes. Adapters for all servo and stepper motors. Features:
5 frame sizes with NEMA 17, 23, 34, 42, 56 flange and metric shaft
Backlash only 6 arc-minutes
Ratios up to 1000:1
High radial and axial loading capacity
20,000 hours service life
Synthetic grease, maintenance free
Reliable operating performance, affordable integration