Materials Managing Energy UNIT 2
This energy unit functions energy up gravity down circuit. Activate the get started solenoid to begin the motor to lift the machine. The lowing motion is activated by the solenoid valve using the decreasing velocity controlled through the pressure compensated movement control valve. Items of this series is often extensively used in the market of logistic units for instance fork lift, mini lift table, etc.
1. The duty of this power unit is S3,i.e.,30 seconds on and 270 senconds off.
2. Clean each of the hydraulic components concerned before mounting the power unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst,which ought to also be clean and no cost of impurities, N46 hydraulic oil is suggested .
four. Oil transforming is required right after the preliminary a hundred operation hrs,afterwards after every single 3000 hrs.
five. The energy unit must be mounted horizontally.
Material Dealing with Energy UNIT one
This electrical power unit is made for the fork lift marketplace, consisting of extremely productive gear pump, DC motor, guide increase and lower valve, tank, ect. The up and down motion are managed through the lever from the guide release valve, and that is outfitted with an electric switch to activate the motor. The lowing velocity is controlled from the strain compensated flow management valve.
one. The duty of this power unit is S3, i.e. thirty seconds on and 270 senconds off.
two. Clean every one of the hydraulic components concerned in advance of installation of the electrical power unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst, which must also be clean and cost-free of impurities, N46 hydraulic oil is advisable .
four. Oil altering is required soon after the first one hundred operation hours, afterwards when just about every 3000 hours.
five. The energy unit shown is built to be mounted horizontally.