gearbox construction

4. Ambient temperature is usually above the advised level – If the ambient temperature is too much, it could diminish the gearbox construction effectiveness of the gearbox. Setting up a cooling lover, or shifting the application to a far more viable location may solve this application.

3. Input rate too much – Lowering the input acceleration may help reduce the amount of wear and tear on the gears.

2. Excessive load – Wear and tear on the gear is caused by connection with various other gears. Reducing the strain will lower the strain the gears make with one another. If a higher load is required, using a larger gearbox could be necessary.

1. Improper installation – Make sure that all bolts connecting the engine and the gearbox are safely fastened.

Problem: Gear Teeth Wear
Solution: Deterioration on gearboxes is organic occurrences. Proper make use of and system maintenance can help extend their lifetime of the gearbox.

3. Gears in locked position – Gears may need to be replaced due to wear and tear. Another possibility would be a foreign object might need to be taken off within the gearbox, causing the gears to maintain the locked position. Check with your dealer for guarantee information.

2. Gear tooth are worn – Have to replace put on gears. Check with your dealer for guarantee information.


Recent Posts


As one of hrc-coupling manufacturers, suppliers and exporters of mechanical products, We offer hrc-coupling and many other products.

Please contact us for details.


Manufacturer supplier exporter of hrc-coupling.