Fan Engine, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, removed from unused 18” or 24” China Air Compressor diameter TPI fans. Made to operate an 18” or 24” electric fan motor china enthusiast blade (blade NOT included).
This motor comes with a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All the wiring between your electric engine, capacitor and quickness control switch is still hooked up nevertheless the cord itself is normally detached as observed in the photos. (Discover “Control Notice” below for alter type.)
T (See “Program Notice” below for utilize in a variety of other applications.)
Measurements: The engine body is 5” diameter and 3 ½” long (not including the shaft). The engine shaft is certainly½” (0.500″) diameter x 2 ½” long with a collection screw clean. There are (4) threaded mounting lugs on leading of the motor, ½” lengthy x .16 dia. with washers and nuts. The studs may actually have got 4mm threads and also to become on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to the next).
Rate: The approximate electric motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Path of rotation (facing the shaft end of the electric motor) is Clockwise.
Control Take note: Motors may come with The 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we’ve demonstrated BOTH variations in the images). Both of these types of switches both control the engine just as (but you have a rotating knob and you possess a pull-chain). In the event that you order several motor at the same time, we can do our better to supply your purchase with each one sort of control or the excess.
Application Note: Do NOT use this electric engine in a nonfan application. This is a totally enclosed fan electric electric motor and designed to have continuous ventilation over the electric motor casing for cooling. The casing isn’t vented and the electric powered motor will overheat and enter automated thermal overload if run in a nonfan system where there isn’t strong ventilation past the motor. (Caution Note: the electric motor will restart immediately when it cools back off.) Using this electrical motor for applications apart from 18 & 24″ TPI fans may possibly also overload the electric motor and lead it to proceed into automated thermal overload. (Your companion blade from another producer may have a steeper blade angle.)
Origin: This electric motor is manufactured in China.