Drive sprocket

A chain and sprocket drive is a kind of power transmission when a roller chain engages with two or more toothed wheels or sprockets, found in engines as a drivefrom crankshaft to camshaft.
Ever-vitality is proud to inventory a wide collection of Sprockets along with this huge selection of agriculture, gardening, preparing food and outdoor items. We stand behind all 26,000 products we sell with our Satisfaction Guarantee. CUSTOMER SUPPORT is the cornerstone of us business, and has recently been for over 50 years.
Ever-power travel sprockets provide tough, reliable service and feature replaceable tooth plates for convenient field maintenance. Tooth plates for 102 and 142 series chain are available with a segmental/symmetrical reversible tooth profile. The 142 DBL, TPL in addition to the 175 and 260 series use our nonsymmetrical profile.
Drive sprockets weren’t always made to be bolted in. At one time they were welded onto the final drive motor and needed to be trim off if they were replaced. At some point, welded-on adapters were mounted that allowed the sprocket to become bolted on, and newer designs utilize the bolted approach altogether.
When someone sends in a final drive motor for all of us to have a look at or?rebuild/reman, we advise them to eliminate the sprocket. We don’t need the sprocket in destination to evaluate the electric motor and the added pounds (which can be significant) unnecessarily increases your shipping costs.
Signs of Sprocket Wear
The teeth on a travel sprocket are where you look for wear . They should be tall and smooth by the end, not sharpened or dished towards the end. And the sprocket, and more specifically its teeth, start to wear, its size becomes small. This causes what’s known as a pitch mismatch, where in fact the pearly whites on the sprocket no longer connect to the track backlinks as effectively. This can accelerate the dress in of the sprocket and reduce the efficiency of your equipment.
If your sprocket shows sign of excessive wear, then its time to replace it before it starts to cause abnormal track wear or begins to negatively affect the performance of your final drive electric motor.
Preventing Sprocket Wear
Among the key methods to prevent accelerated sprocket have on is to check on the track stress. If the tension is too tight, it will cause put on on the sprocket teeth. We’ve talked before about the importance of keeping the undercarriage clean, and the health of the undercarriage make a difference the track tension (especially if there is normally a build up of dried mud and debris). That’s the main reason we put so much focus on keeping the undercarriage clean
With out a functioning drive sprocket, your track drive won’t be able to propel your equipment. Fortunately, there are methods to help your drive sprocket go longer: keep carefully the track tension at an effective level and keep your undercarriage clean.
The undercarriage of your track equipment ought to be inspected regularly. If you find early wear or harm to your tracks, a worn sprocket may be the cause.
15 cogs / teeth
16.77 inches in diameter
12 equally spaced bolt holes
Fits the following Bobcat Compact Track Loaders: T180, T190, T550, T590
Parts can vary according to your serial number.
All Ever-electrical power sprocket tooth profiles are induction hardened to 55 Rockwell C., and so are replaceable. The alternative and repair of tooth plate segments will not require removal of the drive shaft, bearings, etc. Ever-power also designs customized split hub parts for retrofit applications that minimize discipline labor costs.
At first glance, you might feel that if you’ve seen one travel sprocket, you’ve seen all of them. However, Ever-electrical power features added an I.D. lip and spiral band that captivate the needle bearing along with an exterior snap ring that enhances performance and reliability. While easy to overlook, it’s this attention to details that the racer provides come to anticipate from Ever-power.
An I.D. lip and spiral ring that captivate the needle bearing
Exterior snap ring caps sprocket on drum & increases durability
CNC-machined teeth feature a corrosion-resistant finish
Chain Type: #219
Tooth Configuration: Standard


Recent Posts


As one of hrc-coupling manufacturers, suppliers and exporters of mechanical products, We offer hrc-coupling and many other products.

Please contact us for details.


Manufacturer supplier exporter of hrc-coupling.