Worm Gear Quickness Reducers: Double Reduction
Ever-Power. manufacturers double decrease Worm Gear reducers that are built to last. Double reduction units are created with the same high quality parts as the single lowering Worm Gear reducers.
Double Reduction Worm Gear Acceleration double reduction gear reducer Reducer Features
Cost effective
High Reduction: 75:1 – 3600:1 and higher
C-face input or sound shaft input
Mix of two single reduction reducers
Solid or hollow productivity shafts available
Several varieties of bolt-on bases available
Large tensile strength cast bronze worm wheel and a hardened and floor alloy steel worm made integral with the shaft for very long and trouble-free life
All cast iron construction
9 Styles: I, IC, IS, ICS, IM, IMS, ISF, ICSF, IMSF
Double Reduction Worm Gear Quickness Reducer Applications
Conveyors
Packaging Machinery
Cranes/ Hoists/Winches
Mixers/ Agitators
Shipping & Delivery
JIT delivery
Standard shipping: 3-4 days
Same/next day shipping on stock goods at no additional
cost
Double reduction gearing mechanism can be used in enormous machinery and automotives where in the speed should be decreased at a needed level. For eg if the insight speed is definitely 2000rpm and the output rate desired is definitely 300rpm a reduction gearing mechanism is used such as a reduction gear box. Yet, in case of double reduction mechanism, the reduced amount of speed takes place in 2 steps. At first the suggestions from the engine shaft has a pinion mounted onto it through couplings. This pinion gear is then linked to an intermediate equipment which is first reduction gear. This gear is then connected to some other low velocity pinion on another shaft. This low velocity pinion is linked to the next reduction gear which is installed on the propeller shaft which is the output.
Greaves Double Reduction Quickness Reducers are two stage worm reduction systems. A exclusively designed primary worm decrease unit is integrally mounted on a standard single reduction Greaves worm reducer which forms the next stage. The composite models provide the most compact and rigid arrangement for large reduced amount of speed necessary for slower moving machinery. A wide variety of ratios upto 4900:1 is available.
The wormshafts are constructed of top quality case hardening steeL accurately generated, ground and superfinished. The wormwheels include phosphor bronze centrifugally cast rims of substantive sections welded to rigid centres. Considerable flexibility of shaft layout can be permissible with all sorts of Double Reduction units
Ever-Power Double Lowering Worm Gearboxes happen to be two stage worm reduction units.
A specially designed primary worm lowering product is integrally mounted upon a standard single lowering AGNEE worm gearbox which forms the next stage. The composite units provide the most small and rigid set up for large reduced amount of speed necessary for slower going machinery. A broad range of ratios up to 4900:1 is available.
Double Decrease Worm Gear Package Sizes Available with us are 40, 50, 60, 75, 85, 100, 125, 150, 175, 200, 250, 300, 350, 430.
Nominal Gear Ratios: 100:1, 150:1, 200:1,300:1, 400:1, 600:1, 750:1, 1000:1, 1200:1, 2000:1, 2800:1
Nominal ratios listed are a typical selection of commonly applied ratios from the entire range of Ever-Power Twice Reduction Worm Gear Box. Information on other ratios available on request.
Under Driven / Over Driven / Vertical Input or Output Shaft Variation / Shaft Mounted Version / All types with motor installation adaptor /
motor – optional
The worm shafts are constructed with top quality case hardening steel, accurately generated, ground and super finished. The worm wheels include phosphor bronze centrifugally cast rims of significant sections welded to rigid centers. Considerable overall flexibility of shaft layout is normally permissible with all sorts of Double Reduction products.
Product Description
The products are widely applied in the generating equipments of all varieties of industries household and overseas. They are the best selections for nowadays modern facilities of mechanical reducing travel control to realize large twisting distance, huge gear ratio, low noise, high performance and low temperature.
Description:
Customized top quality double worm gear acceleration reducer aluminium gearbox lowering gearbox with electric motor
Ratio:
7.5,10,15,20,30,40,50,60
Color:
Blue, Silver Or while customer’s requirements
Noise:
low noise (<50DB)
Advantage:
High Efficience and low noise and low temperature
Material:
Housing: Die-Cast Aluminum Alloy
Worm Gear-Bronze 9-4#
Worm-20CrMnTi with carburizing and quenching, area harness is 56-62HRC
Shaft-chromium steel-45#
Packing:
Carton and Wooden Case
Bearing:
C&U Bearing
Seal:
NAK SKF
Warranty:
One Year
Input Power:
0.06kw, 0.09kw, 0.12kw, 0.18kw, 0.25kw, 0.37kw, 0.55kw, 0.75kw, 1.1kw, 1.5kw, 2.2kw, 3kw, 4kw, 5.5kw, 7.5kw, 11kw, 15kw
Usages:
Industrial Machine: Food Products, Ceramics, Chemical, Packing, Dyeing,
Wood working, Glass.
IEC Flange:
56B5, 56B14, 63B5, 63B14, 71B5, 71B14, 80B5, 80B14, 90B5, 90B14, 100B5, 100B14, 112B5, 112B14, 132B5, 160B5
Lubricant:
Synthetic & Mineral