DK Detachable Teeth Sprockets

Any harm around the teeth surfaces of a sprocket diminishes the existence in the conveyor chain.
With conventional sprockets, significantly worn sprocket teeth have been repaired by teeth padding or even the whole sprocket was replaced. In both situation, restore was expensive and with teeth padding, accuracy was impaired. We created new sprockets with detachable teeth for independent substitute. This sprocket is highly rated by our buyers for the dramatic financial savings in price and time.
The teeth may be replaced by two procedures: person tooth substitute or sectional teeth substitute.
The bolts and nuts utilised for mounting the teeth on to your sprocket are spot-welded to prevent loosening.
The respective structures are illustrated within the appropriate.
The over photograph and also the leading suitable illustration demonstrate a sprocket for person tooth substitute. Because the joint face concerning the replaced teeth as well as the sprocket is formed inside a special arc, the bonding accuracy is higher as well as the sprocket strength is enhanced. Moreover, since the load acting to the mounting bolts is decreased, there’s less likelihood of loosening. This sprocket building is patented.
You’ll find two kinds of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are applied for big sprockets acquiring hefty loads and welded sheet steel hubs for other applications.


Recent Posts


As one of hrc-coupling manufacturers, suppliers and exporters of mechanical products, We offer hrc-coupling and many other products.

Please contact us for details.


Manufacturer supplier exporter of hrc-coupling.