Deep groove ball bearings will be the hottest bearing type. Consequently, they can be found from LYHY in many models, variants, series and sizes. Deep groove ball bearings are versatile, self-retaining bearings with sound outer rings, inner rings and ball and cage assemblies. These sort of bearings happen to be of basic design, durable in procedure and simple to maintain; They are available in single and twice row designs and in open and sealed variants.

In a deep-groove ball bearing, the competition dimensions are near the dimensions of the balls that run in it. Deep-groove ball bearings can support bigger loads. Because of the production technology used, open up bearings can continue to have turned recesses on the external band for seals or shields. Because of their low frictional torque, they will be ideal for high speeds.

Packing:
1. Bearing surface is protected with the anti-rust oil first; In that case covered with the plastic-type material film;
2. Then loaded the roller bearings with draft papered professional belts;
3. Finally, packing the bearings with wood box fully at the outer packing to invoid the rust or the moist;
4. We can as well packing the bearings relating to buyers’ special requirement;

Feather
Top quality steel: Ultra clean steel to extend bearing life by up to 80%
Advanced grease technology: LYHY lubricants that can extend grease your life and performance.
High Grade Balls: Calm and smooth operation even at high speed
Super finished raceways: Specially honed to reduce noise and enhances lubricant distribution and existence.
Paten seals: Provide resistance to contamination in the toughest environments
Quality Assured: 100% assessment ensures total product quality
Our deep groove ball bearings deliver dependable performance in a broad range of applications and conditions. With super-finished raceways and controlled geometries, our premium design helps ensure consistent quality. Our portfolio contains normal, thin section, narrow, vast and miniature and Deep Groove Ball Bearing extra-tiny deep groove ball bearings that span 3 mm to 400 mm bore sizes. The expanded product line carries a complete offering of open, shields, seals and snap ring combinations.
Its chrome steel engineering makes it durable and resistant to deformity under heavy loads. The rubber seals on both sides of the bearing preserve lubricant in and contaminants out. This single-row sealed ball bearing can be for make use of in applications that entail combined radial and axial loads and a need for high running reliability at high rotational speeds. This kind of applications consist of clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile equipment, among others.