This Ruland setscrew shaft collar is constructed of aluminum. It is a setscrew-type shaft collar for applications supporting low axial loads and simple positioning. Setscrew collars possess improved holding power when the shaft material is softer compared to the setscrew material. It is made of aluminum for level of resistance to corrosion and tarnishing and is definitely lightweight for make use of in applications where materials weight is a account. This collar includes a forged setscrew for securing the collar onto the shaft. The operating temps for this collar range from -40 to 107 degrees C (-40 to 225 degrees F). This shaft collar is suitable for use in various applications, including in the automotive industry to situate parts in car power steering assemblies, the production industry to locate parts on a conveyor belt system, and the hobby craft industry to hold wheels on axles in handy remote control vehicles, among others.
Shaft collars are ring-shaped devices primarily used to secure parts onto shafts. In addition they serve as locators, mechanical stops, and spacers between additional components. The two simple types of shaft collars are clamping (or split) collars, which come in one- or two-piece designs, and setscrew collars. In both types, a number of screws hold the collars in place on the shaft. In setscrew collars, screws are tightened through the collar until they press straight against the shaft, and in clamping collars, screws are tightened to uniformly compress the collar around the shaft without impinging or marring it. Setscrew collars and one-piece clamping collars must be installed by sliding the collar over the finish of the shaft, while two-piece clamping collars separate into two halves and may be installed between parts on the shaft. Shaft collars are manufactured from an array of materials including zinc-plated steel, light weight aluminum, nylon, and neoprene. Within nearly all sorts of machinery and sector, shaft collars are used in applications which includes gearbox assemblies, motor bases, machine tools, drive shafts, agricultural implements, medical equipment, and paper and metal mill equipment, among others.
Ruland manufactures shaft collars, rigid couplings, and zero-backlash movement control couplings including beam couplings, bellows couplings, Oldham couplings, curved jaw couplings, and miniature disc couplings. The business, founded in 1937, and headquartered in Marlborough, MA, complies with Restriction of Hazardous Substances (RoHS) and Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH) standards.
· Setscrew shaft collar for applications helping low axial loads and simple positioning
· Effective on shafts manufactured from softer material compared to the setscrew material
· Aluminum for resisting corrosion and tarnishing
· Includes a forged setscrew for securing the collar onto the shaft
· Operating temperatures range from -40 to 107 degrees C (-40 to 225 degrees F)

When you require to replace your existing flagpole flash collar this 2 piece collar makes installation easy. No need to remove the pole or even to go over the very best of the pole. This 2 piece cast aluminium collar has a hidden hinge underneath the collar so no rivets or screws are in view.
The heavy-duty 2 piece Cast Aluminum Collars is the many durable collar offered in the industry today! Cast from Aluminum Alloy, these 1/4″ thicker cast collars are designed to withstand the harshest of environments. replacement or addition to an existing flagpole.
I.D. approximately 1/8″ wider than Butt Diameter.
Aluminium Decorative Pipe Collar – 5 inch Fuel Type: Gas, Liquid Propane. Internal Diameter: 5″. Width: 10.625″. Double Wall Building. UL Outlined. This Decorative Pipe Collar for 5 Inch Type B Pipe from the Round Gas Vent series is definitely a Type B gas component and consists of the duralock system for a good seal. This pipe collar is an optional accessory. It is to be utilized for decorative reasons. EPT Type B Gas Vent is designed to meet the rugged needs of the work site. The inner wall is recessed to remove damage in handling. EPT’s innovative program for a lock-tight connection for Type B Gas Vent called DuraLock. See the alignment indicators meet; feel the ends grasp together; hear the snap because the connection firmly locks into place. Type B gas vents aren’t suitable for use with wood-burning up or coal applications, commercial ovens, exhaust ranges and hoods, grease or pollution ducting, or as free-position exhaust vents for temperature applications. Type B Gas Vent has been engineered to warmth up quickly. It remains hot through the operation of the applying with minimal condensation in the appliance and vent program. Pipe lengths can be found in multiple lengths, 6 to 60 ins, with a full enhance of adjustable and rigid fittings. Searching for Simpson Dura-Vent? You found it! Simpson Dura-Vent provides transformed their name to EPT. EPT is a recognized technological innovator in the venting market. Consistently the first ever to aluminum collar china market with new innovations in venting systems, EPT has captured a leadership placement in emerging markets. EPT has patents for several products and continues to design safe and technologically advanced venting. The company’s research into solving issues with corrosion, when biofuels such as corn are used, resulted in the break-through patent for PelletVent Pro. Scientifically verified components and unequalled engineering make EPT products not only the best option, or safest choice, however the only choice for professional quality venting items.
When you require to displace your existing flagpole flash collar this 2 piece collar makes installation easy. You don’t need to remove the pole or to go over the top of the pole. This 2 piece cast aluminium collar includes a hidden hinge underneath the collar so no rivets or screws are in view.
The heavy-duty 2 piece Cast Aluminum Collars is the most durable collar offered in the industry today! Cast from Light weight aluminum Alloy, these 1/4″ thicker cast collars are made to withstand the harshest of conditions. alternative or addition to an existing flagpole.
Our spun aluminium flash collar can be an ornamental covering that adds a finished look to the bottom of the flagpole. It also conceals and helps shield your ground sleeve from the elements. Prices shown below are for the standard bright satin finish. Our flash collars are also obtainable in anodized and other finishes upon ask for. Please demand availability and pricing.
The Style B Spun Collar is our most popular style flash collar for shoe bottom flagpoles and is produced to exacting specs from the best quality components. This flash collar supplies the perfect finishing contact for your flagpole. For Use With Shoe Foundation Flagpole Applications